Slip Printer - Sharp ER-A770 Instruction Manual

Receipt printer (continued)

Slip printer

Procedure
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
NOTE When "ER-03RP" is connected, select "NO."
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE: Uses two or more sheets.
ONE SHEET: Uses one sheet.
NOTE This option is available when the "TM-300" is selected.
• HEAD LOGO PRINT (Use the selective entry)
Select a header logo print timing.
EACH ISSUE: The logo will be printed before printing
transaction on each receipt.
PRE-PRINT: The logo will be printed beforehand printing
transaction for a next receipt.
• RCPT LENGTH (Use the numeric entry)
Minimum length of the bill to be printed paper on the receipt
paper
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
SHARP ER-FBP40
EPSON TM-295
EPSON TM-U950
EPSON TM-T88/85
EPSON TM-U210
EPSON TM-300
EPSON TM-5000
199