Page 2
Major keys used in the SRV mode The following major keys are used in the SRV mode. FUNCTION DESRIPTION ↑ COURSOR UP Moves cursor up ↓ COURSOR DOWN Moves cursor down → COURSOR RIGHT Moves cursor right ← COURSOR LEFT Moves cursor left PAGE UP PAGE UP...
SRV mode PROCEDURE In the ER-A750, the following reset switch (location No.: S2) is used 1) Turn off the AC switch. to switch to the service (SRV) mode and to reset. 2) Set the reset switch to “OFF” position 3) Turn on the AC switch.
5) Enter the password key operation CHAPTER 2. MASTER RESET DISPLAY: (All Memory Clear) ENTER PASSWORD There are two possible methods to perform a master reset. Password input procedure: Press the four corners of the key- board in the sequence of a, b, c, and MRS-1 (Master resetting 1) Used to clear all memory contents and return machine back to its initial settings.
Page 5
6) Set the fixed keys in the table below. (Start from the zero “0” key, MRS-2 (Master resetting 2) The keys are displayed sequentially.) Used to clear all memory and keyboard contents. This reset returns DISPLAY: all programming back to defaults. ENTER 0 The keyboard must be entered by hand.
Sample of program reports CHAPTER 3. READING OF SRV PROGRAM 1. [1 SYSTEM PRESET] DISPLAY: The setting contents of SRV mode can be checked with the display or printer. DISPLAY: SRV mode screen Select “1 READING” and press the ENTER key. ↓...
Page 14
PRINTER: File table No. / No. of records File table No. / No. of index records-No. of data records / No. of used records File table No. / No. of records / No. of blocks / No. of used records File memory start address Empty memory start address Memory end address...
CHAPTER 4. SRV MODE 1. [1 DEVICE ASSIGN] PROGRAMMING DISPLAY: Setting item select screen DISPLAY: SRV mode screen Select [1 DEVICE ASSIGN] and press the ENTER key. ↓ Select “2 SETTING” and press the ENTER key. DISPLAY: DEVICE ASSIGN screen 1/2 ↓...
Page 17
PRINTER NAME Connected printer name EPSON TM-T85 SHARP ER-03/04RP When this machine is used as a “report printer” of a bulky data report such as PLU report, printing will be cut midway automatically on the side of the ER-03/04RP when the printing time reaches the time-out (about 30 sec).
Page 18
DISPLAY: SYSTEM PRESET screen 3/3 2. [2 SYSTEM PRESET] DISPLAY: Setting item select screen Select the job # to be changed and enter the value. The content of each jog is described below. Select “1 SYSTEM PRESET” and press the ENTER key. ↓...
Page 19
903-C: 1.Scale entry system [JOB#906] : MRS=0031 2.Entry of tare 906-A: 1.Printing of Dept. and PLU code 3.Unit of weight for the scale 2.Entry which makes the PLU stock counter negative 1.Scale entry 2.Entry of tare 3.Unit of weight 1.Printing of Dept. 2.Entry which makes the PLU 903-C 906-A...
Page 20
909-B: 1.Printing of data on PLU resetting report [JOB#908] : MRS=0000 1.Printing of data on PLU resetting report 909-B 908-A: GT print on Z report Print GT1 (NET) GT2 (+) GT3 (–) 908-A Skip Print Print 909-C: 1. Printing of VOID mode totalizer and MGR VOID totalizer Skip Print on Z2 report...
Page 21
Format 1: (Logo message format) Normal ← Date / Machine No. üé⁄ üå⁄ èç 123456 ← CC-No. / Time / Cashier name / #0123 12:34 Cashier Code jack____0001 Format 2: Normal ← Date / Machine No. üé⁄ üå⁄ èç 123456 [JOB#913] : MRS=0104 ←...
Page 22
[JOB#914] : MRS=1100 [JOB#915] : MRS=0040 914-A: 1. Recipt issuing at no-sale 915-A: 1.Amount symbol 2. No-sale key separation from CA/AT key for no-sale func- 1.Amount symbol 915-A tion “$” 3. Tax delete “*” “(Space)” 1.Recipt 2.No-sale key separation 3.Tax issuing from CA/AT key for no- delete...
Page 23
916-D: 1.Coupon PLU printing on X/Z report 917-D: 1. Printing of Total Tax on X/Z report 2.Net sales subtotal(NET1) printing on X/Z report 2. Printing of Gross manual Tax and Refund manual Tax on X/Z report 3.Check change total printing on X/Z report 3.
Page 24
918-D: 1.Tip paid includes cash tip [JOB#920] : MRS=2000 : INLINE PROGRAMMING AREA 2.Clearing of tip totalizer at server Z1 report 3.Printing of tip totalizer on the server report 920-A: 1.Back-up master function 1.Back-up master function 920-A 1.Tip paid 2.Clearing of tip 3.Printing of tip includes totalizer at...
Page 25
925-C: 1. Report printing when consolidation daily and periodic [JOB#922] : MRS=0008 : INLINE PROGRAMMING total transaction reading or resetting is taken AREA 1.Report printing when consolidation daily and 922-A,B: Not used (Fixed at “00”) periodic total transaction reading or resetting is 925-C 922-C,D: 1.
Page 26
[JOB#927] : NOT US ED MRS=0000 [Z REPORT COUNTER] DISPLAY: Setting item select screen [JOB#928] : MRS=0060 928-A,B: Not used (Fixed at “00”) 928-C: 1.Printing of PLU on bill when it is 0 2.Printing of text of a tied PLU in set PLU on bill 1.Printing of PLU 2.Printing of text of a tied 928-C...
Page 27
[PGM2MODE SECRET#] DISPLAY TEXT CONTENTS TRANSACTION Z1 Transaction Z1 report counter 0000 DISPLAY: Setting item select screen CONSOLI.TRAN. Z1 Consolidation transaction Z1 0000 report counter SERVER Z1/Z2 Server Z1/Z2 report counter 0000 HOURLY Z1 Hourly Z1 report counter 0000 PLU Z1/Z2 PLU Z1/Z2 report counter 0000 GLU Z1...
Page 29
Position code Position code Function name Key text Function name Key text (MRS) (MRS) 056 SUB TOTAL VOID KEY ST VD 112 CHARGE 4 KEY — 057 REFUND KEY RFND 113 CHARGE 5 KEY — 058 RETURN KEY RETURN 114 CHARGE 6 KEY —...
Page 30
KEY POSITION CODE [FILE] DISPLAY: Setting item select screen Select “8 FILE” and press the ENTER key. [INIT. KEY LAYOUT] ↓ DISPLAY: FILE screen 1/5 The keyboard layout is reset to the standard layout. DISPLAY: Setting item select screen ↓ Screen is selected with the “PAGE DOWN”...
Page 31
FILE TABLE -1 File table No. Group NO. FILE NAME DISPLAY TEXT TYPE (Create/Erase) Dept DEPT 01,02,03,05 Dept Text (8) DEPT TEXT (8) Dept Text (16) DEPT TEXT (16) Dept Mark Down DEPT MARK DOWN 15,16,18,23 PLU Price 1 PLU PRICE 1 16,23 PLU Price 1 to 5 PLU PRICE 1 to 5...
Page 32
DISPLAY: Type 1 input screen Type 0 Create/Erase only Type 1 Create/Erase and Increase/dicrease the number of records or blocks. Type 2 Create/Erase and Increase/dicrease the number of blocks ** : The files which are created or erased by the entry of the group ** : For individual erase When an item of Type 0 is selected, the following display is shown.
Page 33
FILE TABLE -2 Table Record Block Label Data File Name Size Size Dept. peset price text(8) text(16) Daily Term Save Daily Consolidation Receive Daily(markdown) Term(markdown) Save Daily(markdown) Consolidation (markdown) Receive(markdown) PLU preset ***** price1 ***** (15) price1-5 ***** (15) text1(8) ***** (15) text1(16)
Page 34
Table Record Block Label Data File Name Size Size Name (50) Sign off Server Transaction Label (53) Receive (53) Manager Employee Label **** Name **** (67) Employee Sales 20-40 ****-**** Employee working time 20-100 ****-**** Hourly Label Daily (71) Save Daily (71) Consolidation (71)
Page 35
DISPLAY: The following display is shown. [SUPERVISOR ON/OFF] DISPLAY: Setting item select screen Select the item with the cursor and press the ENTER key. Select “9 SUPERVISOR ON/OFF” and press the ENTER key. [MEMORY INITIAL] ↓ DISPLAY: Setting item select screen DISPLAY: SUPERVISOR ON/OFF screen 1/2 Select “10 MEMORY INITIAL”...
Page 36
[SSP] [IR DATA SEND] DISPLAY: Setting item select screen DISPLAY: Setting item select screen Select “11 SSP” and press the ENTER key. Select “12 IR DATA SEND” and press the ENTER key. ↓ ↓ DISPLAY: SSP screen DISPLAY: IR DATA SEND screen ↓...
Page 37
[IR DATA RECEIVE] DISPLAY TEXT CONTENTS SELECT ITEM ECR(IrDA) DISPLAY: Setting item select screen communication ECR(ASK) format setting ER-02FD(ASK) SEND DATA Send content ALL RAM select STANDARD RAM 03MB/04MB(1) 03MB/04MB(2) 04MB(3) 04MB(4) RESERVED 1 RESERVED 2 SPEED Communication PROGRAMMED SPEED speed setting 115200bps 57600bps...