4.
Now you can display images and play back movies as you normally do.
-_
iMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera's
[1_11] ( REC) and [I-_--I](PLAY) buttons for "Power On" or "Power On/Off" (page 159).
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
_NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [A] (DISP) to change the display contents.
Recording
Camera
Images to a DVD Recorder
or Video
Deck
Use one of the following methods to connect the camera to the recording device
using the camera's bundled AV cable.
- DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
- Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting "1_ Only" for the slideshow
"Images" setting (page 97). When recording images to an external device, use [A]
(DISP) to clear all indicators from the monitor screen (page 162).
For information
about connecting a monitor to the recording device and about how to
record, see the user documentation
that comes with the recording device you are
using.
95
Viewing Snapshots and Movies