Casio Exilim EX-S12 User Manual page 111

[r_]] (PLAY) --_ Snapshot Screen ---_ [MENU] ---_ PLAY Tab ---_ Dubbing
You can add audio to a snapshot after you shoot it. You can re-record a snapshot's
audio whenever you want. You can record up to about 30 seconds of audio for a
single snapshot.
1.
Press the shutter button to start audio
recording.
.
Remaining recording time
Press the shutter button again to stop audio recording.
• Take care that you do not block the camera's microphone
with your fingers while recording.
• Good recording results are not possible when the camera is
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
- Audio Format: WAVE/IMA-ADPCM (WAV extension)
• Adding audio (dubbing) is not possible for the following
types of images.
- Images created using MOTION PRINT
- Protected images
• To delete audio, perform the following operation:
Dubbing ---_ Delete ---_ [SET] ---_ [MENU].
m I
Microphone
iMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
111
Other Playback Functions (PLAY)