Casio Exilim EX-M1 Release Note

Functions Added by Firmware Update
Updating the EX-S1/EX-M1 firmware to Version 1.10 or greater adds certain
functions to your camera. Note that the User's Guide that comes with the
camera does not cover these functions.
Turning Image Review On and Off
Image review displays an image on the monitor screen as soon as you record it.
Use the following procedure to turn image review on and off.
1.In the REC mode, press MENU.
2.Select the "REC"tab, select "Review", and then rock the controller to
the right.
3.Rock the controller up or down to select the setting you want,
and then click.
To do this:
Display images on the monitor screen
immediately after they are recorded
Do not display images immediately after they
are recorded
NOTE
The initial default setting is "Off".
Ability to turn off Controller Function Assignment
Under its current configuration, you can assign one of four functions
(REC Mode, EV shift, Flash Mode, White Balance Mode) to the controller
rock left or rock right operations. After installing this update, you have
the option of turning off the controller function assignment.
1.In the REC mode, press MENU.
2.Select the "REC" tab, select "L/R Key", and then rock the controller
to the right.
3.Rock the controller up or down to select "Off", and then click.
When "Off" is selected, the controller does not perform any of
the four assignable functions.
Monitor Screen On/Off Setting Memory
When you turn off the camera, it remembers whether you have the monitor
screen turned on or off. The monitor screen on/off setting is restored
the next time you turn on power.
Select this setting:
On
Off