Table of Contents
Advertisement
• To change Auto Shutter trigger sensitivity (Sensitivity)
1. Use [A] and [V] to select "Sensitivity"
and then press [,].
.
Use [,]
and [,]
to select the sensitivity
setting you want, and then
press [SET].
• You can select any one of three sensitivity levels, from _
(Lowest) to
(Highest).
• With the _
(Highest) setting, the auto shutter release is triggered relatively
easily. Auto shutter release triggering becomes more difficult with the
(Lowest) setting, but recorded images have the least blur. Experiment with
Auto Shutter trigger sensitivity settings to find the one that work best for you.
•
Using
Auto Shutter
in Combination
with Continuous
Shutter
The following describes how Auto Shutter works while used in combination with
Continuous
Shutter (page 40).
The camera will go back into Auto Shutter standby and be
ready to shoot again each time it is triggered. To stop an
ongoing Continuous
Shutter operation, press [SET].
3 continuous shutter images will be shot with flash when Auto
Shutter is triggered.
73
Advanced Settings
Advertisement
Table of Contents
