Table of Contents
Advertisement
• "l't_tm Multi" cannot be selected for the Auto Focus area while you are using Face
Detection (page 43).
• "l'_i_ Tracking" cannot be selected for the Auto Focus area while you are using
Auto Shutter (page 71).
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
1. In the REC mode,
press
[SET].
2. Use [A]
and [V]
to select the fourth
Control
Panel option from the top
(Lighting).
3.
Use [,]
and [_.] to select the setting you want and then press [SET].
Performs a higher level of brightness correction than the "On"
setting. When this option is selected, it takes longer for the image
to be stored after the shutter button is pressed.
Performs brightness correction.
Does not perform brightness correction.
• You also can optimize the balance between bright areas and dark areas in
existing images (page 104).
39
Snapshot Tutorial
Advertisement
Table of Contents
