Table of Contents
Advertisement
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1.
In the REC mode, press [,]
or [_.] to turn off the Make-up
Mode.
• The Face Detection icon []
will be displayed on the monitor screen while the
Make-up Mode is turned off.
• If pressing [,]
or [1_] does not turn off the Make-up Mode, it means that the
Make-up Mode setting is not assigned to the [,]
and [1_] keys. Assign the
setting to the keys (page 78) and perform the above step again.
2.
Press [SET], and then use [A] and [V] to select the sixth Control
Panel
option from
the top (Face Detection).
3.
Use [,]
and [P.] to select "_
Face Detection:
On" and then press
[SET].
4.
Point the camera
at the subject(s).
The camera will detect human faces and display a
frame around each one.
.
.
Half-press
the shutter
button.
The camera will focus and the frames around the
faces it focuses on will turn green.
Press the shutter button the rest of the way
down.
Face Detection
icon
43
Snapshot Tutorial
Advertisement
Table of Contents
