Table of Contents
Advertisement
See page 2 0forinformation
about supported
memory cards and how toload a
memory card.
W
To replace
the
card
memory
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
• Never remove a card from the camera while the
back lamp is flashing green. Doing so can cause
the image save operation to fail and even damage the memory card.
•
Using
a Memory
Card
• SD memory cards and SDHC memory cards have a
write protect switch. Use the switch when you need to
guard against accidentally
deleting data. Note,
however, if you write protect an SD memory card you
must then turn write protection off whenever
you want
to record to it, format it, or delete any of its images.
• If a memory card starts to behave abnormally during
Write enabled
Write disabled _
image playback, you can restore normal operation by reformatting
it (page 161 ).
However, it is recommended
that you always take along multiple memory cards
whenever
using the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.)
174
Appendix
Advertisement
Table of Contents
