GE Model 20 Owner's Manual And Installation Instructions page 23

Installation Instructions
REPLACING THE FREEZER DRAWER
(on some models)
I
(_Two people may be required to complete
this procedure.
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
[] Pull out the rail assemblies to the full
length on each side of the cabinet.
[] Locate the slots on the inside of the rail
assemblies near the back.
Slot
Rail assembly
[] Insert the hooks at the back of the
drawer railings into the slots on the rail
assemblies.
[] Lower the front of the drawer, making
sure the tabs on the sides of the railings
fit into the front slots in the rail assemblies,
G
Slot
Tab
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
(cont.)
[] Replace the Phillips head screws on both
rail assemblies.
Phillips
Screw
[] REPLACE THE FREEZER BASKET
Replace the lower freezer basket by
lowering it into the frame.
23