GE Model 20 Owner's Manual And Installation Instructions page 21

Installation Instructions
[] SET THE CONTROLS
Set the controls to the recommended
setting.
5 5
[.EOOMME.OEO CO.T.OLSE ..OS]
=
f_
0 "F IS RECOMMENDED 37 _F IS RECOMMENDED
[] REMOVE PACKAGING
START ICEMAKER
(icemaker models)
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C) Place half width basket onto drawer
slides. See About the freezer section
for instructions.
Set the icemaker power switch to the
I (on) position. The icemaker will not
begin to operate until it reaches its
operating temperature of 15°F (-9°C)
or below. It will then begin operation
automatically. It will take 2-3 days to
fill the ice bin.
NOTE:
In lower water pressure conditions, the
water valve may turn on up to 3 times
to deliver enough water to the icemaker.
21