Dell 3115 Color Laser User Manual page 77

You can set up to a maximum of five items and the fi kes priority. Enter the shortest address
first before proceeding next longer address when setting multiple filters.
following section explains how the IP Filter operates.
1. IP F ure
a. Enabling Printing Specified User
The following describes the procedure to enable printing on the "192.168.100.10" IP ad
ocedures:
i. Click the first column of Access List row 1.
ii. Enter "2.168.100.10" in the Address field and "255.255.255.255" Address Mask
field.
iii. Select Permit.
iv. Clic Apply New Settings.
b. Disabling Print a Specified User
The following describes the procedure to disable prin rom the "192.168.100.10" ress.
Procedures:
i. Click the first column of Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255 the Address
Mask field.
iii. Select Reject.
iv. Cli first column of Access List row 2.
v. 0.0.0.0" in the Address field and "0.0." in the Address Mask field.
vi. Select Permit.
vii. Cli Apply New Settings.
c. Enabling and Di Printing from Network Addresses
u can enable printing from the "" network address and disable print the "192.168.200"
network However, the example below describes how to enable printing from th
192.168.200.10" IP address.
Procedures:
i. Click the first column of the Access L row 1.
ii. Enter "192.168.200" in the Address field and "255.255.255.255" in the Address
Mask field.