Context Name
File Server Name*1
Polling Interval
NCP
On
Packet
Burst
Off
Passwor
Confirm Password
Status Information
Discovery
1
*
The following gal characters: semicolon (;), colon (:), asterisk (*), questi (?), period (.),
comma (,), yen mark (¥), back slash (\), doub tion ("), comparison symbols (< >), brac
operation symbols (+, =, or ~), pipe (|), slash (/), and space ( )
NOTE:
ings in the NetWare page will be va when NetWare or the multifunction printer
is rebooted. Click the Restart printer to apply new settings button new settings.
NOTE:
An optional multi-protocol card ired to display the NetWare page.
SMB
Purpose:
configure detailed settings for SMB.
Values:
selected.
Specifies the context name of the Print Server Object
up t lphanumeric characters. Configure this item only
when Directory: PServer Mode or Directory r
Mode is selected.
Speci file server name up to 47 alphanumeric
characters. Configure this i when Bindery: PServer
Mode is sele
Sets the val from when print data enters the print
queue until printing st he setting range is from 1 to
1000 seconds. The original setting rema if no input is
made. Configure this item only when Bindery:
PServer Mode or Directory: P de is selected.
Uses NCP packet burst.
Does not use NCP packet bu
S print server password up to 32 alphanumeric
characters. Configure t only when Binary: PServer
Mode or Directory: PServer Mode is selected.
Enter the password ag
Displays the sta NetWare.
Select the check box to enable Active Discovery.