Dell 3115 Color Laser User Manual page 567

-Pr=mode
Specifies print mode.
-Cc=mo
Spec types.
This option is available only fo nting and when entry data is RGB data.
-Gc=mode
Specifies RGB gamma correction.
This option is availa for color printing and when entry data is RGB data.
mode
Specifies scr
-Gg=
Specifies gray guaranteed.
This option is available only for color printing.
-Ct
Specifies color transformation.
This option is available only for color printing.
-Br= mode
Speci htness adjustment.
-RGBc= mode
Specifies RGB color correction.
This option is available only for color printing and w y data is RGB data.
-R ode
Specifies RGB inpu e.
This option is available only for ng and when entry data is RGB data.
-RGBTp= mode
S RGB color temperature.
This option ble only for color printing and when entry data is RGB data.
-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middlgh:yellow-
low;yellow-middle:yellow high:black-low:black-middle:bla
S adjustment value for color balance of each color/density.
-C value must be specified in the following order:
Cyan low density ium density, Cyan high density, Magenta low density, Magenta mediu
Magenta high density, Yellow low density, Yellow medium density, Y h density, Black low
density, Black medium density, Black high densi