Enable Xmlreply; Remove Oa Address Ipv6; Remove Oa Dns - HP BL480c - ProLiant - 4 GB RAM User Manual

ENABLE XMLREPLY

•
Command:
ENABLE XMLREPLY
•
Description:
Enables XML reply data over an HTTP connection
•
Access Level/Bay Level:
OA administrator, OA operator
•
Restrictions:
None

REMOVE OA ADDRESS IPV6

•
Command:
REMOVE OA ADDRESS IPV6 {<bay number>} <ipv6 address/prefix length>
•
Description:
Removes the IPv6 static address for the Onboard Administrator. If IPv6 is enabled, then this
command takes effect immediately. If no Onboard Administrator number is provided, the command
defaults to the active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The prefix length is mandatory.
o
The <ip address> value must be in the form
o
####:####:####:####:####:####:####:####/###, where each #### ranges from 0 to
FFFF and the prefix /### ranges from 0 to 128.

REMOVE OA DNS

•
Command:
REMOVE OA DNS [<OA bay number>] <ip address>
•
Description:
Removes the IP address of a DNS server from the list for the specified Onboard Administrator.
The DNS servers are used only if the system is configured to use a static IP address.
If no bay number is provided, the command default to the active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.
Enclosure network configuration commands 90