•
Description:
Displays a list of Firmware images, configuration scripts, and ISO images present on the enclosure
USB media
•
Access level/Bay level:
OA administrator, OA operator
•
Restriction:
None
Example
OA-00215AB195CB> show usbkey
Firmware Image Files
---------------------------------------
usb://d1/hpoa225.bin
Configuration Script Files
---------------------------------------
usb://d1/USE62317RY.cfg
ISO Image Files
---------------------------------------
usb://d1/win2003sp4.iso
usb://d1/BB130.2008_0822.11.iso
usb://d1/HPSUMForce.iso
usb://d1/FW820.2008_0730.61.iso
UPDATE IMAGE using USB key
•
Command:
UPDATE IMAGE {[FORCE] <url> | SYNC}
•
Description:
The IMAGE command downloads a new flash image from the network and uses it to update the
o
Onboard Administrator firmware. If a redundant Onboard Administrator is present in the system,
then this command flashes and validates its firmware before attempting to flash the active
Onboard Administrator.
Supported protocols are HTTP, FTP, and TFTP.
o
The URL must be formatted as: protocol://host/path/filename.
o
The URL syntax for IPv6 addresses is protocol://[<ipv6 address>]/path/file.
o
If your FTP server does not support anonymous logins, a username and password can be
o
specified within the URL formatted as: ftp://username:password@host/path/filename.
Use FORCE to enable downgrading firmware even if settings and passwords might be lost.
o
The UPDATE IMAGE SYNC command initiates a firmware sync of the Active and Standby
o
Onboard Administrators.
For USB protocol, see SHOW USBKEY.
o
•
Access level/Bay level:
OA administrator, OA operator
Image Version
-------------
2.25
("SHOW
USBKEY" on page 153)
USB support commands 154