SET URB [ URL | INTERVAL | PROXY URL ]
•
Description:
Sets settings for URB reporting.
SET URB URL { <url> } sets the URB endpoint URL.
SET URB PROXY URL { <url> } sets the proxy URL to use when sending URB messages.
SET URB INTERVAL { HOURLY <minute> | DAILY <hour> | WEEKLY <day> <hour> | MONTHLY
<day> <hour> } sets the interval at which URB messages arecommand
sent.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
SET URB URL { <url> }: The URL must be either an HTTP or HTTPS URL and can be no longer than
128 characters.
SET URB PROXY URL { <url> }: The URL can be no longer than 128 characters.
SET URB INTERVAL { HOURLY <minute> | DAILY <hour> | WEEKLY <day> <hour> | MONTHLY
<day> <hour> }:
The minutes parameter must be 0-59.
o
The DAILY hour parameter must be 0-23.
o
The WEEKLY day parameter must be 0-6 where 0 is Sunday and 6 is Saturday.
o
The MONTHLY day parameter must be 1-31.
o
SHOW SERVER BOOT
•
Command:
SHOW SERVER BOOT {ALL | <bay number> [{ - | , } <bay number>]}
•
Description:
Displays the boot settings for the specified servers
•
Access level/Bay level:
All
Bay specific
•
Restrictions:
You must have access to the specified bay
o
This command is not applicable to HP Integrity server blades.
o
Example
OA-0018FE27577F> SHOW SERVER BOOT 1
Server Blade #1 Boot Information:
One time boot from: None
IPL Devices (Boot Order):
CD-ROM
Floppy Drive (A:)
USB
Hard Drive (C:)
Blade management commands 130