Cisco WS-C6506 Software Manual page 691

Chapter 22 Administering the Switch
Table 22-3
and tswitch) have been customized from the standard TCL command set to avoid conflicts with the
Catalyst 6500 series switch software. The following two commands have been specifically added to the
software:
• auto answer {on | off}
When set to on, the TCL shell will answer yes if prompted by the switch for a yes or no answer. The
default setting is off.
• echo {on | off}
When set to off, the output from the switch commands is not displayed on the screen. The default is
on.
OL-8978-04
lists the supported TCL commands. The commands with a t prefix (tformat, trename, tset,
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
TCL Scripting
22-25