Scheduling A Reset Within A Specified Amount Of Time - Cisco WS-C6506 Software Manual

Chapter 22 Administering the Switch
The maximum scheduled reset time is 24 days.
Note
To schedule a reset at a specific time, perform this task in privileged mode:
Task
Step 1
Schedule the reset time at a specific time.
Step 2
Verify the scheduled reset.
The minimum downtime argument is valid only if the system has a standby supervisor engine.
Note
This example shows how to schedule a reset at a specific time:
Console> (enable) reset at 20:00
Reset scheduled at 20:00:00, Wed Aug 18 1999.
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Wed Aug 18 1999 (in 0 day 5 hours 40 minutes).
Console> (enable)
This example shows how to schedule a reset at a specific time and include a reason for the reset:
Console> (enable) reset at 23:00 8/18 Software upgrade to 5.3(1).
Reset scheduled at 23:00:00, Wed Aug 18 1999.
Reset reason: Software upgrade to 5.3(1).
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 23:00:00, Wed Aug 18 1999 (in 0 day 8 hours 39 minutes).
Console> (enable)
This example shows how to schedule a reset with a minimum downtime:
Console> (enable) reset mindown at 23:00 8/18 Software upgrade to 5.3(1).
Reset scheduled at 23:00:00, Wed Aug 18 1999.
Reset reason: Software upgrade to 5.3(1).
Proceed with scheduled reset? (y/n) [n]? y
Reset mindown scheduled for 23:00:00, Wed Aug 18 1999 (in 0 day 8 hours 39 minutes).
Console> (enable)

Scheduling a Reset Within a Specified Amount of Time

You can schedule a reset within a specified time with the reset in command. For instance, if the current
system time is 9:00 a.m. and the reset is scheduled in one hour, the scheduled reset takes place at
10:00 a.m. If you or NTP advances the system clock to 10:00 a.m., the reset takes place at 11:00 a.m. If
the clock is advanced ahead of the scheduled reset time, the reset takes place 5 minutes after the current
time.
To schedule a reset within a specified time, perform this task in privileged mode:
Task
Step 1 Schedule the reset time within a specific amount
of time.
Step 2
Verify the scheduled reset.
OL-8978-04
Command
reset [mindown] at {hh:mm} [mm/dd] [reason]
show reset
Command
reset [mindown] in [hh] {mm} [reason]
show reset
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Scheduling a System Reset on the Switch
22-11