Deleting A Vlan - Cisco WS-C6506 Software Manual

Chapter 11 Configuring VLANs
This example shows how to add port 3/17 to VLAN 150 with VLAN port-provisioning verification
enabled:
Console> (enable) set vlan 150 name Eng
VTP advertisements transmitting temporarily stopped,
and will resume after the command finishes.
Vlan 150 configuration successful
Console> (enable)
Console> (enable) set vlan 150 3/17 Eng
VLAN 150 modified.
VLAN 1 modified.
VLAN
---- -----------------------
150
Console> (enable)

Deleting a VLAN

This section describes the guidelines for deleting the VLANs:
•
•
•
•
•
When you delete a VLAN, any ports that are assigned to that VLAN become inactive. Such ports remain
Caution
associated with the VLAN (and are inactive) until you assign them to a new VLAN.
You can delete a single VLAN or a range of VLANs. To delete a VLAN on the switch, perform this task
in privileged mode:
Task
Delete a VLAN.
This example shows how to delete a VLAN (in this case, the switch is a VTP server):
Console> (enable) clear vlan 500
This command will deactivate all ports on vlan(s) 500
Do you want to continue(y/n) [n]?y
Vlan 500 deleted
Console> (enable)
This command will deactivate all ports on vlan(s) 10
All ports on normal range vlan(s) 10
will be deactivated in the entire management domain.
Do you want to continue(y/n) [n]?
OL-8978-04
Mod/Ports
3/16-17
When you delete a normal-range Ethernet VLAN in VTP server mode, the VLAN is removed from
all switches in the VTP domain.
When you delete a normal-range VLAN in VTP transparent mode, the VLAN is deleted only on the
current switch.
You can delete an extended-range VLAN only on the switch where it was created.
You cannot delete the default VLANs.
To delete a Token Ring TrBRF VLAN, you must first reassign its child TrCRFs to another parent
TrBRF, or delete the child TrCRFs.
Command
clear vlan vlan
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Deleting a VLAN
11-13