Using A Wps Push Button To Connect To A Wireless Access Point Or Router - NETGEAR WNA1000 - Wireless-N 150 USB Adapter User Manual

Using a WPS Push Button to Connect to a Wireless Access Point
or Router
To join a network using a push button:
1. Click the icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
Figure 2-3
Note: If you are not sure if your router supports WPS, select No to connect. If your
router does not support WPS and you select Yes, the router or access point
connection will time out and no wireless network connection will be
established.
2. If your router supports WPS, select Yes, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. Log in to the access point or router that you have selected.
5. From the router's main menu, select Add WPS Client. On the Add WPS Client screen, select
Push Button.
6. To start the WPS process, either press the push button on the access point or router, or click the
icon on the Add WPS Client screen.
NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual
v1.0, August 2009
2-5