Setting Up Wep Encryption Security - NETGEAR WNA1000 - Wireless-N 150 USB Adapter User Manual

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

Setting Up WEP Encryption Security

Follow the steps below to configure WEP encryption security:
1. Run the WNA1000 Smart Wizard.
a. Make sure that the WNA1000 software is installed and the wireless-N USB adapter is
connected to the USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
2. Configure the Security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WEP.
Figure 2-13
2-16
v1.0, August 2009