Table of Contents
Advertisement
NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual
Smart Wizard, Configure Automatically
You are prompted to connect wirelessly with one of the following screens:
WPS-capable networks in your area
Figure 1-3
Note: If you are not sure if your router supports WPS, select No to connect. If your router
does not support WPS and you select Yes, the router or access point connection
will time out and no wireless network connection will be established.
1. Follow the on-screen prompts to connect to a wireless network:
If your router supports WPS and you want to use WPS to create a secure connection,
•
leave the radio button selected, and click Next to continue. Follow the Smart Wizard
steps to connect using WPS.
If your router does not support WPS, select your wireless network name from the list of
•
wireless networks and click Next to continue. (If your wireless network has
implemented security, you need to know which type of security (WEP, WPA-PSK, or
WPA2-PSK) and you need the passphrase to complete your setup.
2. Create a wireless settings Profile.
a. If your wireless network has implemented security, and you did not use Push
select the radio button for the security type and enter the security
Passphrase field.
b. In the Profile field, create a unique name for your settings. If you do not select a profile
name, your settings will be saved using the default name Profile.
1-6
No WPS-capable networks in your area
v1.0, August 2009
Hidden network
N' Connect,
passphrase in the
Advertisement
Table of Contents
