Use The Router As A Wireless Access Point - NETGEAR Nighthawk R6700 User Manual

Use the Router as a Wireless Access Point

You can set up the router to run as an access point (AP) on the same local network as
another router.
To set up the router as an AP:

1. Use an Ethernet cable to connect the Internet port of this router to an Ethernet port in
the other router.
2. Launch an Internet browser from a computer or wireless device that is connected to the
network.
3. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Wireless AP.
6. Select the Enable AP Mode check box.
Nighthawk AC1750 Smart WiFi Router
Specify Network Settings
123
Cable this port to an
Ethernet port on another
router