Show Statistics - NETGEAR MBR1310 User Manual

NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Field
Wireless Port Name (SSID)
(See Manually
Region
Configure Your
Wireless Settings on
Channel
page 26.
Mode
Wireless AP
Broadcast Name
Wireless Isolation
Wi-Fi Protected
Setup

Show Statistics

Click the Show Statistics button on the Router Status screen to display router usage
statistics:
The following table explains the statistic fields.
Field Description
Status The link status. Note that LAN2, LAN3, and LAN4 are guest networks.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The average egress line utilization for this port.
Rx B/s The average ingress line utilization for this port.
Up Time The time elapsed since the last power cycle or reset.
Description
The service set ID, also known as the wireless network name.
The country where the unit is set up for use.
The current channel, which determines the operating frequency.
The current mode, which determines the maximum data speed.
Indicates if the access point feature is disabled or not. If not
enabled, the Wireless LED on the front panel is off.
Indicates if the router is configured to broadcast its SSID.
Indicates whether wireless isolation is enabled or disabled.
Indicates status of the Wi-Fi Protected Setup.
Managing Your Network
59