Technical Specifications - NETGEAR MBR1310 User Manual

NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Feature
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet)
Source MAC filtering
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/Region
RF channel
Operating mode
Data rate
Output power
Access point
Authentication type
Wireless Card Access List

Technical Specifications

Technical Specifications
Network Protocol and Standards
Compatibility
Power adapter
Physical specifications
TCP/IP, DHCP
• Europe: 230V AC, 50 Hz, input
• All regions (output): 12V DC @ 1.0A output
• Dimensions: 6.8 in. x 5.03 in. x 1.28 in. (173 mm x 128 mm x 33 mm)
• Weight: 0.65 lbs without the stand (0.29 kg)
Factory Default Settings and Technical Specifications
Default Behavior (continued)
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Enabled
3Bredband000A
Enabled
Enabled
Auto (maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors,
including volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.)
United States (in North America; otherwise, varies by
region)
Auto
Up to 145 Mbps
Best
Full
Enabled
Open system
All wireless stations allowed
96