Table of Contents
Advertisement
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Log In to Your Router
When you first connect to your router during installation, a Setup Wizard displays. For help
using the Setup Wizard to configure your Internet and wireless network, see the Mobile
Broadband 11n Wireless Router MBR1310 Installation Guide.
After the initial configuration, you can use your web browser to log in to the router to view or
change its settings. Links to Knowledge Base and documentation are also available on the
router main menu.
Note:
Your computer needs to be configured for DHCP. For help with
configuring DHCP, check the documentation that came with your
computer.
When you have logged in, if you do not click Logout, the router waits 5 minutes after no
activity before it automatically logs you out.
To log in to the router:
1.
Type http://www.routerlogin.net in the address field of your browser, and then press
Enter. A login window displays:
2.
Enter admin for the user name and your password (or the default, password
information about how to change the password, see
page 63.
Note:
If you changed your password and do not remember what it is, you
can restore the router to its factory settings. See
Settings
3.
If the router has not been configured, the Smart Wizard screen displays. After the router has
been configured, one of the following screens displays:
•
Firmware Upgrade Assistant screen. After initial setup, the Firmware Upgrade
Assistant screen displays unless the Check for Updated Firmware Upon Log-in check
box is cleared.
on page 95.
Connecting to the Internet
Change the Built-In Password
Factory Default
12
For
).
on
Advertisement
Table of Contents
