N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Show Statistics Button
Click the Show Statistics button on the Router Status screen to display a screen similar to
this:
Figure 37. Router statistics screen
Port. The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports.
•
For each port, the screen displays the following:
Status. The link status of the port.
-
TxPkts. The number of packets transmitted since reset or manual clear.
-
RxPkts. The number of packets received since reset or manual clear.
-
Collisions. The number of collisions since reset or manual clear.
-
Tx B/s. The current line utilization—percentage of current bandwidth used.
-
Rx B/s. The average line utilization.
-
Up Time. The time elapsed since the last power cycle or reset.
-
ADSL Link Downstream or Upstream. The statistics for the upstream and downstream
•
ADSL link. These statistics are of interest to your technical support representative if you
have problems obtaining or maintaining a connection.
Connection Speed. Typically, the downstream speed is faster than the upstream speed.
•
Line Attenuation. The line attenuation increases the farther you are physically located
•
from your ISP's facilities.
Noise Margin. The signal-to-noise ratio, which is a measure of the quality of the signal on
•
the line.
Poll Interval. The interval at which the statistics are updated in this window. Click the
•
Stop button to freeze the display.
Network Maintenance
71