Router Front Panel - NETGEAR MBR1310 User Manual

NETGEAR Mobile Broadband 11n Wireless Router MBR1310

Router Front Panel

The router front panel shown in the following figure contains control buttons and status LEDs.
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel of the router.
Button/LED Activity
WPS Press this button to open a 2-minute window for the router to connect with other WPS-enabled
devices. For more information about using the WPS method to implement security, see
Push 'N' Connect (WPS) to Configure Your Wireless Network
WiFi Turn the mobile broadband and WiFi radios in the router on and off. Use the user interface to
select whether the mobile broadband radio or the WiFi radio or both radios will be controlled by
this button. The default is the WiFi radio only. Both radios are on by default.
USB Solid green
Blinking green
Off
WPS
WiFi
USB
Power/Test
Internet
LAN
ACT
WAN
2G/3G
Signal Quality
Description
A USB port has detected a USB device.
Data is being transmitted or received.
No link is detected on these ports.
Connecting to the Internet
8
Use
on page 29.