Advanced Wireless Settings; Wireless Station Access Control - NETGEAR MBR1310 User Manual

NETGEAR Mobile Broadband 11n Wireless Router MBR1310

Advanced Wireless Settings

From the main menu under Advanced, select Advanced Wireless Settings to display the
following screen:
Field
Enable Wireless Router Radio
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
Router PIN
Disable Router PIN
Keep Existing Wireless Settings

Wireless Station Access Control

By default, any wireless computer that is configured with the correct SSID and wireless
security settings is allowed access to your wireless network. You can use wireless access
point settings in the Wireless Settings and Advanced Wirelless Settings screens to further
restrict wireless access to your network:
Description
Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
These should be left at their default settings.
The PIN number used for Push 'N' Connect.
By default, this check box is cleared. This allows the WPS clients to
discover the router's PIN.
By default, this check box is cleared. This allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check
box so that your SSID and wireless security settings remain the
same if other WPS-enabled devices are added later.
Advanced Settings
67