Figure 1-13 Removing And Replacing The Top Cover - HP rp4410 Installation Manual
Installation guide, sixth edition - hp 9000 rp4410/rp4440
Hide thumbs
Also See for rp4410:
- Service manual (246 pages) ,
- Manual (51 pages) ,
- Programmer's manual (109 pages)
Table of Contents
Advertisement
Installing the System
Installing Additional Components
Figure 1-13
Removing and Replacing the Top Cover
Thumbscrews
Rear of Chassis
Replacing the Top Cover
To replace the top cover, follow these steps:
Step 1. Align the tabs at the rear of the top cover with the corresponding slots in the chassis. Fully seat the
tabs into the slots and push forward until it seats.
Step 2. Tighten the two thumbscrews securely.
31
Chapter 1
Advertisement
Table of Contents
Troubleshooting
