Adding Guest Networks - NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router User Manual

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
• WPS Settings. For information about WPS settings, see
Configure Your Wireless Network" on page
• Restricting access by MAC address. You can use a Wireless Card Access List to restrict
access. See "Restricting Access by MAC Address" on page

Adding Guest Networks

Adding a guest network allows visitors at your home to use the Internet without having to know
your wireless security key. You can add a guest network to each wireless network, b/g/n 2.4 GHz
or a/n 5 GHz.
To add a guest network, do the following (these instructions shown are for the b/g/n guest network,
but apply to both):
1. Select Guest Network b/g/n from the Setup menu. The Guest Network Settings screen
appears
Figure 2-10
2. Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
Safeguarding Your Network
"Using Push 'N' Connect (WPS) to
2-13.
v1.3, October 2009
3-2.
2-21