NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router User Manual page 93

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
5. Click Add Service.
Figure 5-9
6. In the Service Name field, type a descriptive service name.
7. In the Service User field, select Any (the default) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address, and enter the IP address of one
computer to restrict the service to a particular computer.
8. Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP.
9. In the Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
10. Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
11. Click Apply. The service appears in the Port Triggering Portmap table.
Customizing Your Network Settings
v1.3, October 2009
5-21