Adding Guest Networks - NETGEAR WIRELESS-G ROUTER WGR614V10 Reference Manual

Now, only devices on this list can wirelessly connect to the Wireless-G Router.
Warning: MAC address filtering adds an obstacle against unwanted access to your
network by the general public. However, because your trusted MAC
addresses appear in your wireless transmissions, an intruder can read them
and impersonate them. Do not rely on MAC address filtering alone to secure
your network.

Adding Guest Networks

Adding a guest network allows visitors at your home to use the Internet without having to know
your wireless security key.
To add a guest network, do the following:
1. Select Guest Network from the Setup menu. The Guest Network Settings screen appears
Figure 2-8
2. Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
Safeguarding Your Network
Wireless-G Router WGR614v10 Reference Manual
v1.0, February 2010
2-14