NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router User Manual page 41

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
3. For the non-WPS devices that you want to connect, open the networking utility and follow the
utility's instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/
PSK + WPA2/PSK security method, and passphrase).
4. For the WPS devices that you want to connect, follow the procedure
Add a WPS Client" on page 2-14
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the wireless router.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the WPS Settings
screen.
5. To view a list of all devices connected to your wireless router (including wireless and
Ethernet-connected), see
Safeguarding Your Network
or "Using PIN Entry to Add a WPS Client" on page
"Viewing a List of Attached Devices" on page
v1.3, October 2009
"Using a WPS Button to
2-15.
4-10.
2-19