Connection Status - NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router User Manual

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
Table 4-1. Wireless Router Status Fields (continued)
Field
Wireless
Settings b/g/n
Wi-Fi Protected Setup b/g/n
Wi-Fi Protected Setup a/n

Connection Status

To view the connection status, on the Router Status screen, click Connection Status.
Figure 4-5
Using Network Monitoring Tools
Description
Name (SSID): The 11N wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
Region: The geographic region where the router is being used. It might be
illegal to use the wireless features of the router in some parts of the world.
Channel: Identifies the operating channel of the wireless port being used.
The default channel is Auto. When Auto is selected, the router will find the
best operating channel available. If you notice interference from nearby
devices, you can select a different channel. Channels 1, 6, and 11 will not
interfere with each other.
Mode: Indicates the wireless communication mode:
• Up to 54Mbps
• Up to 130Mbps (default)
• Up to 300Mbps
Wireless AP: Indicates whether the radio feature of the router is enabled. If
this feature is not enabled, the Wireless light on the front panel is off.
Broadcast Name: Indicates whether the router is broadcasting its SSID.
Indicates whether Wi-Fi Protected Setup is configured for the b/g/n network.
Indicates whether Wi-Fi Protected Setup is configured for the a/n network.
v1.3, October 2009
4-8