Setting Up Your Router For Internet Access - NETGEAR WNR3500v1 - RangeMax Wireless N Gigabit Router Setup Manual

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your wireless router to set it
up initially and to make any changes to your wireless router's settings later.
The factory default state is reset when you use the Restore Factory Settings button.
See "Restoring the Default User Name and Password" on page 38
information.
To access the router using its login name and password:
1. Type http://www.routerlogin.net in the address field of your browser, and then click Enter.
You can enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
A login window similar to the one shown in
Figure 11
2. When prompted, enter
Password, both in lowercase letters. (For security reasons, the router has its own user name
and password.)
The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
The Main menu will display.
Manually Installing Your Router
admin for the router User Name and
Figure 11 will display.
password
for more
for the router
19