NETGEAR WNR3500v1 - RangeMax Wireless N Gigabit Router Setup Manual page 29

Push the wireless router's push-button for 5 seconds, then release. The push-button light
2.
should begin to blink..
While the router is in WPS enable mode (a maximum of 2 minutes), wireless
security is not enabled. Indoors, computers can connect over wireless networks
at a range of several hundred feet. Unlike wired network data, your wireless
data transmissions can extend beyond your walls, and anyone with a compatible
adapter can receive them, allowing others outside your immediate area to access
your network. For more information about security, see the Reference Manual
that is available from a link on the Resource CD as well as a link in the main
menu of your router.
While the push-button light is blinking, you have 2 minutes to enable WPS on the device you
3.
are trying to connect with the router. The blinking ceases when one of these two conditions
occurs:
• WPS is enabled between the router and the other device you are connecting to.
• The 2-minute window period expires for establishing a WPS connection. Whether or not a
connection is established, your router security and SSID (service set identification key)
are now configured for WPS.
The push-button remains lit to show you have enabled WPS security.
If after enabling WPS you need to connect a device that does not include WPS functionality,
4.
you will need to first log in to the router and obtain the security key. For more information,
refer to "Configuring Security Through the Wireless Settings"
Manual, available as a link on the Resource CD.
If you want to disable WPS, you have to reset your router to factory default settings. For
5.
information about resetting to the default settings, see
Password" on page
Configuring Security Through the Wireless Settings
To set up wireless connectivity and enable wireless security:
1. Log in to the router at http://www.routerlogin.net with its default user name of admin and
default password of password. (If you have changed the User Name and Password from the
defaults, use what you have set up).
Manually Installing Your Router
38.
and the online Reference
"Restoring the Default User Name and
25