Warning Label
• This label is a warning label for Class 2 laser products that comply with
IEC60825-1:1993+A1:1997.
• Although Class 2 laser light is only emitted momentarily, never look directly into
the beam light.
• CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• The laser light emitted by this laser scanner has a maximum output of less than
1 mW and a wavelength of 650 nm.
Bar Code Scanning Position
Position the laser scanner close to the bar code when scanning small bar codes.
Position the laser scanner at a distance from the bar code so that the bars enter the light
when scanning large bar codes.
Margin
Good
Bad
Warning!
Never look directly into the laser light.
• This product scans using laser light. Never look directly into the laser light
or shine the laser light into the eyes.
E-30
DT-X10_E_P14_36.p65
Margin
Good
Bad
30
Good
Bad
Bad
05.4.1, 11:04 AM