HP D7171A - NetServer - LPr Upgrade Manual page 79

Chapter 7
d. Close the PCI board guide latch after installing each full-length
accessory board. (See Figure 7-3.)
6. For all unused PCI slots, make sure that the PCI hold-down latches are in
the closed position. These latches must be closed even if the slots are
empty. Only slots whose PCI hold-down latches are closed will be
powered on.
5d. Close the PCI board guide latch
after installing each full-length
accessory board.
Figure 7-3. PCI Board Guide Latch
Finishing the Assembly
73