HP D7171A - NetServer - LPr Upgrade Manual page 63

Chapter 5
20. Install fan cover.
19. Insert all six fans.(See Figure 5-17.) Orient each fan so that the connector
on the bottom of the fan is located on the left side. The arrow on the fans
point to the rear of the NetServer.
20. Install the fan cover.
a. Set the fan cover tabs in place, pull the cover toward you, then push the
cover back into place.
b. Secure the screw in the center-front of the fan cover.
Figure 5-17. Install Fans and Fan Cover
Assembling the LXr 8500
19. Insert all six fans.
57