This chapter gives information about troubleshooting your 108 Mbps Wireless Media Router
WGT634U. After each problem description, instructions are provided to help you diagnose and
solve the problem.
Note: Product updates are available on the NETGEAR, Inc. Web site at
http://www.netgear.com/support/main.asp.
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
When power is first applied, verify that the Power LED is on.
1.
After approximately 10 seconds, verify that:
2.
The Local port LEDs are lit for any local ports that are connected.
a.
If a port's LED is lit, a link has been established to the connected device. If a LAN port is
connected to a 100 Mbps device, verify that the port's LED is green. If the port is 10
Mbps, the LED will be amber.
The Wireless port LED is lit.
b.
The Internet port LED is lit.
c.
If any of these conditions does not occur, refer to the appropriate following section.
Troubleshooting
Preliminary - Go to http://kbserver.netgear.com/prod-
Chapter 9
Troubleshooting
9-1