Dynamic Ip Smart Wizard-Detected Option - NETGEAR WGT634U - 108 Mbps Wireless Storage Router Reference Manual

• Click Apply to save your settings.
• Click Test to test your Internet connection. If the NETGEAR Web site does not appear within
one minute, refer to

Dynamic IP Smart Wizard-Detected Option

If the Setup Wizard discovers that your ISP uses Dynamic IP assignment, you will see this menu:
Smart
Figure 3-9: Setup
• Enter your Account Name (may also be called Host Name) and Domain Name. These
parameters may be necessary to access your ISP's services such as mail or news servers. If you
leave the Domain Name field blank, the router try to discover the domain. Otherwise, you may
need to enter it manually.
• If you know that your ISP does not automatically transmit DNS addresses to the router during
login, select Use these DNS servers and enter the IP address of your ISP's Primary DNS
Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
• Click Apply to save your settings.
• Click Test to test your Internet connection. If the NETGEAR Web site does not appear within
one minute, refer to
Connecting the Router to the Internet
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
Chapter 9, "Troubleshooting".
Wizard menu for Dynamic IP address accounts
Chapter 9, "Troubleshooting".
3-13