NETGEAR WGT634U - 108 Mbps Wireless Storage Router Reference Manual page 30

Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
Power
Check the status lights and verify the following:
• Power: Verify that the power light is on. When you first turn on the router, the power light
blinks while the router performs a diagnostic self test. When the test completes, the power
light turns solid green. If after 2 minutes the power light continues to blink, reset the unit
using the factory reset button according to the instructions in
Configuration and Password
• Internet: Verify that the Internet light on the wireless router is lit. If not, make sure the
Ethernet cable is securely attached to the wireless router Internet port and the powered on
modem.
• Wireless: Verify that the Wireless light is lit. The factory default setting is for the wireless
feature to be turned on. If you turn off the wireless feature, the Wireless light will go off. If
the wireless feature is turned on but the Wireless light is off, reset the unit using the
factory reset button according to the instructions in
and Password
• LAN: A LAN light is lit. Green indicates your computer is operating at 100Mbps speed.
Amber indicates 10Mbps speed. If no LAN lights are lit, check that the Ethernet cable
connecting the powered on computer to the router is securely attached at both ends.
3-6
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
Internet
Wireless
on page
on page 7-7.
LAN Port 4
7-7.
Restoring the Default Configuration
Connecting the Router to the Internet
Restoring the Default