NETGEAR WGT634U - 108 Mbps Wireless Storage Router Reference Manual page 32

Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
4. R S
UN THE ETUP
Figure 3-6: Setup Wizard
You are now connected to the router. If you do not see the menu above, click the Setup
a.
Wizard link on the upper left of the main menu.
Click Next to proceed. Follow the screen prompts and input your ISP settings, as needed.
b.
If prompted with the message that new software is available, click Yes and follow the
c.
on-screen prompts to update your router with the latest software enhancements.
If you choose not to use the auto-update feature, you can check for new firmware by
following the procedure in
The Setup Smart Wizard will report the type of connection it finds. The options are:
d.
• Connections which require a login using protocols such as
PPPoE, PPTP, Telstra, or Bigpond broadband connections.
• Connections which use dynamic IP address assignment.
• Connections which use fixed IP address assignment.
Instructions for filling in the configuration menu for each type of connection are presented
later in this chapter.
At the end of the Setup Wizard, click the Test button to verify your Internet connection
e.
and register your product. If you have trouble connecting to the Internet, use the
Troubleshooting Tips below to correct basic problems, or refer to the Reference Manual
on the CD.
Note: Product updates are available on the NETGEAR, Inc. web site at
http://www.netgear.com/support/main.asp.
You are now connected to the Internet!
3-8
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
W
IZARD TO CONNECT TO THE
"Upgrading the Router Software" on page
I
NTERNET
Connecting the Router to the Internet
6-5.