NETGEAR WGT634U - 108 Mbps Wireless Storage Router Reference Manual page 29

Securely insert one end of the Ethernet cable that came with your wireless router into a
d.
LAN port on the router such as LAN port 4 (C), and the other end into the Ethernet port of
your computer (D).
D
Figure 3-3: Connect the computers on your network to the router
R
ESTART YOUR NETWORK IN THE CORRECT SEQUENCE
2.
Warning: Failure to restart your network in the correct sequence could prevent you from
connecting to the Internet.
First, turn on the cable or DSL modem and wait 2 minutes.
a.
Now, turn on your wireless router by plugging in the power cord, and then wait 30
b.
seconds.
Last, turn on your computer.
c.
Note: If software usually logs you in to the Internet, do not run that software or cancel it if
it starts automatically.
Connecting the Router to the Internet
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
C
3-5