NETGEAR WNR2200 - N300 Wireless Router User Manual page 61

You can use the Show Statistics and Connection Status buttons to view additional status
information, as described in
following table explains Router Status screen fields.
Table 4-1. Wireless Router Status Fields
Field
Hardware Version
Firmware Version
GUI Language Version
Internet MAC Address
Port
IP Address
DHCP
IP Subnet Mask The IP subnet mask being used by the Internet (WAN) port of the router. For
Domain Name
Server
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask The IP subnet mask being used by the Ethernet (LAN) port of the router.
Using Network Monitoring Tools
N300 Wireless Router with USB WNR2200 User Manual
"Connection Status" on page 4-7
Description
The router model.
The version of the router firmware. It changes if you upgrade the router.
The localized language of the GUI.
The Media Access Control address. This is the unique physical address
being used by the Internet (WAN) port of the router.
The IP address being used by the Internet (WAN) port of the router. If no
address is shown, or is 0.0.0.0, the router cannot connect to the Internet.
• None. The router uses a fixed IP address on the WAN.
• DHCP Client. The router obtains an IP address dynamically from the ISP.
an explanation of subnet masks and subnet addressing, click the link to the
online document "TCP/IP Networking Basics" in Appendix
The Domain Name Server addresses being used by the router. A Domain
Name Server translates human-language URLs such as www.netgear.com
into IP addresses.
The Media Access Control address. This is the unique physical address
being used by the Ethernet (LAN) port of the router.
The IP address being used by the Ethernet (LAN) port of the router. The
default is 192.168.1.1.
Identifies whether the router's built-in DHCP server is active for the LAN-
attached devices.
The default is 255.255.255.0.
v1.0, September 2010
and "Statistics" on page
B.
4-8. The
4-6