NETGEAR WNR2200 - N300 Wireless Router User Manual page 31

2. From the main menu, select Wireless Settings to display the Wireless Settings screen. Set the
Security Options by selecting the WEP radio button in the Security Options section:
Figure 2-3
3. Select the Authentication Type: Automatic or Shared Key.
Note: The authentication scheme is separate from the data encryption. You can select
an automatic authentication scheme, which may not run authentication, but still
leaves the data transmissions encrypted. If you require strong security, use both
the Shared Key and WEP encryption settings.
4. Select the Encryption Strength setting:
• WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
• WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
5. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
Safeguarding Your Network
N300 Wireless Router with USB WNR2200 User Manual
v1.0, September 2010
2-9