NETGEAR WNR2200 - N300 Wireless Router User Manual page 106

4. From the Priority Category list, select Ethernet LAN Port. The QoS - Priority Rules screen
changes:
Figure 6-6
5. From the LAN port list, select the LAN port that will have a QoS policy.
6. From the Priority drop-down list, select the priority that this port's traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
7. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
8. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
9. Click Apply.
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address, follow these steps:
1. From the main menu, under Advanced, select QoS Setup, and click the Setup QoS Rule
button. The QoS Setup screen displays, as shown in
2. Click Add Priority Rule.
Fine-Tuning Your Network
N300 Wireless Router with USB WNR2200 User Manual
Figure 6-2 on page
v1.0, September 2010
6-8.
6-11