Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
VID
VID List
IPv4 Network Address
IPv6 Network Address
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Show All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
VLAN Precedence Settings
This window is used to configure VLAN precedence settings.
To view the following window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as show
below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
VLAN Precedence
Click the Apply button to accept the changes made.
Enter a VLAN ID.
Enter a list of VLAN IDs.
The user can enter the IPv4 address used in here. Remember to include the subnet
mask using the / notation.
The user can enter the IPv6 address used in here. Remember to include the subnet
mask using the / notation.
Figure 4-18 VLAN Precedence Settings window
Description
Select the unit you want to configure.
Select the starting and ending ports to use.
Use the drop-down menu to select the VLAN precedence as MAC-based VLAN or
Subnet VLAN.
76
Advertisement
Table of Contents
